- Rear coilover conversion
- Coil over or springs?
- Turner strut brace
- Painting rotor caps
- Edc Control Module Position E93 M3
- Alignment pins: to pull or not to pull
- Megan Springs VS H&R Springs
- OEM Brake life????
- Knocking noise from steering, is this normal?
- Coilover questions
- Realistic way of installing stiffer spring without lowering car?
- Undecided between 95A vs 80A Powerflex Poly Rear Upper Outer Bushings
- KW DDC install and Review
- Spring Size
- Track set up
- Rotor cost.
- Performance Friction Direct Drive V3 Rotors Finally Released!
- BBK colors
- Inner Bushing Rear Trailing Arm
- Swift springs installed but no drop
- Diy Kw H.a.s. E93
- delete
- Front strut mount / rear shock mount DIY difficulty
- missing Left rear pad wear sensor
- Camber plates..
- Suggestion for rear Drop (KW HAS)
- Help with vorshlag
- Why are my KW sleeves clunking like crazy?
- PFC Direct Drive Rotors and OEM Pads - Compatible?
- Dinan Springs Only
- Orielly Brake Pads
- MCS Settings
- AFE springs?
- Stoptech ST60 and ST40
- Spacers and Broken Wheel Bolts
- Upper shock mount diy question
- Teach me on track brake set ups.
- Competition Pack EDC Shocks on 08 M3
- Has anyone had to replace a hard brake line?
- Coukd loose strut top nuts raise car height?
- Alignment question
- EDC malfuntion
- Chassis rigidity with back seat out
- scraping noise whenever change in momentum/direction happens
- Ran slower with camber plates and alignment
- Solid subframe bushings with stock diff bushings
- Rear bump stops for Bilstein shocks?
- Bilstein B16 Damptronic Coilovers
- Broadway Suspension Coilovers & Air Kits Available
- Rear upper-outer or inner control arm Spherical Bearings
- Brake reset
- Brake service light came on...but
- Can the KW sleeve kit achieve this drop?
- What is the best suspension kit for e92 M3 with EDC
- Help determine if these Brembo brakes are fake
- Slight popping noise?
- Overhauling ST60/ST40 Trophy BBK - What is worth replacing?
- Overhaul kits
- KW DDC install!
- Please help! Are these oem rotors?
- Strut Tower Reinforcement Plates
- Broadway Static 500S - Rebound Delay
- Wtb front tension arms with monoball bushings
- Do I need new front bump stops?
- Anyone with experience with BOTH Swift Spec R and KW H.A.S.
- ZCP Springs on EDC M3
- Ohlins R/T Settings
- weird vibration with new motormounts
- KW rear strut bottom eye bushing
- who makes custom brembo caliper brackets for front.
- Brembo fitment on 19" BBS LM'Rs?
- What part is this? Under the fuel tank...
- Coilover height vs. ride comfort
- Calling E90s: eibach ride height
- Rubbing on stock suspension and stock wheels
- how do i tighten up the e brake?
- What color bbk on a jerez blk m3?
- Effect of front sway bar upgrade only?
- Rear trailing arm bush
- Brake pads and fluid for street car doing HPDE
- Ohlins R/T clunking after install
- Cpm lower reinforcement bar
- KWv3 Sagging Driver's Side Rear
- Edc aftermarket coils on non edc
- Wear on Front Control Arms
- Who wants to be the cheap rotor guinea pig?
- Rear strut Tower reinforcement
- Nitron spring rates
- Recommended height for Bilstein B16 Damptronic Coilovers?
- PFC Z-54 front brake system
- KW bump dials missing
- KW V3 on EDC Equipped M3
- CPM Lower Reinforcement Brace>>>
- *California* KW V3 with edc cancellation install
- E92 M3 Honking?
- KW V3 Cancellation Kit EDC On
- M4 380mm brake rotors fits E92 m3 hub?
- Brake Pedal Feel
- Lowering springs on 20's
- Track Gurus Chime In - Hawk Pad Selection - Is DTC OVERKILL???
- Where to buy Rotora pads & discs?
- Stainless lines
- H&r race springs
- Anyone ever see a spring just snap?
- Brake Fluid Low Again
- Remote Suspension Reservoir Mounting Question
- E92 M3 Front Strut top nut size?
- Suspension question
- Epic Friction Brake Pads
- Suggestion please.
- bad EDC damper? 5FE6 - Shock-absorber valves, front axle
- Anyone have Bilstein B8 with Swift?
- Anyone have ST XTA coilovers?
- Sparta Evolution Braking Systems: An Introduction
- Plz delete duplicate
- Lowering ZCP with SPRINGS?
- Brake duct hose question
- Removing brake rotors with studs ?
- Weight Saving Vert's only
- KW HAS Height Question
- Going from eibach springs to swift
- Powder coating suspension bits
- Right vs. Left brake rotors
- Front End Links Breaking
- What coilovers for wide tires?
- Best rear toe arms/links
- EDC Emulation installed... where?
- Who is the OEM supplier for rotors and pads?
- Used rotors?
- Are E92 and E90 Rotors the same parts?
- Brake Leak around Rear Diff. Causes?
- StopTech BBK Rotors
- Brembo bbk pads
- Are brake pedal bushings replaceable on E92?
- New rotors and pads bedding
- KWv3 on ZCP
- Pad suggestions and replacing rotors
- Brake kit that fits 18" rims
- Need recommendations new rotors and pads
- Hawk HPS or OEM brake pads
- How do you know when to replace your EDC shocks
- Sparta Evolution Saturn BBK: Big performance, small price.
- Pad Burned Onto Rotor after 1 Track Day
- moton shock install help.
- Ground Control Camber Plate Users - Advice Needed
- DELETE
- Official Essex Designed AP Racing Brake Wheel Fitment and Picture Thread!
- Reinstalling clip after upgrading to delrin clutch pedal bushings
- PFC Rear BBK Dilemma and Info
- Question for Ohlins R&T Owners
- Sway bar issue
- E90 M3 and regular E90 Camber Plates
- Article about our LSD (GKN's Visco-Lok)
- Rear squat issue after supercharger
- PFC BBK Pad Rattle and Clip
- M performance Brake VS Stock E90M3 brake
- DGR Coilovers
- Chipped Brake Pad
- Brake pulsating
- Rotor Recommendation
- Brake Pad Wear Sensor Replacement
- EDC - no difference in settings: SOLVED?
- 911 GT3 Brake Ducts on E92 M3
- Goldilocks Brake Pads?
- Coilover systems VS ZCP EDC Height.
- Turner Strut Brace v Dinan
- 380BBK on 18" wheels. Wont it be hot?
- springs and bumpstops
- EDC strut install question
- How to install rear endlink
- Nose lift kits
- Front Brake pad question with pics
- Pad wear sensors
- Differential Bolt Clicking
- Just replaced brakes - getting a lot of squeeling
- Safely Remove StopTech Logos?
- Sparta Evolution SPP Pad Program: BBK and OEM pad sizes
- Hybrid road/track brake pads
- e90 M3 Alignment Weights
- i rhink my suspension is toast
- Possible brake/hub issue
- DEAL: StopTech ST40 Front (Red) $1797 Shipped @ ECS
- Tips for getting a stuck front rotor off
- Cup Kit Installed
- Alignement specs incorrect
- Stoptech Piston Size (ST60)
- Front end clunks over bumps at low speed - Loose strut bolt?
- Bilstien replacement shocks unavailable for US & Europe!!
- Running Stop Tech Trophy
- Refinishing st60/40s
- Brake duct cooling options-
- Rotor replacement each time you change the pads?
- are sway bars easy to install?
- Help Diagnosing Steering Wheel Vibration
- Rear pads/rotors contact issue
- ECS Coilovers
- installed akg 75d subframe and 95a diff bushings
- RD Sport Spring Equivalent?
- Best price on full OEM brake kit?
- Normal rotor wear? Trying to diagnose issues.
- Hotchkis Sway bars via Bimmerworld
- I think my shocks are going out
- Clunk when going over bumps sideways
- How soon after driving can I change pads?
- Scale Suspension
- Custom valved Ohlins v. others
- another endlink question
- Spring rates
- Is my master cylinder bad?
- New springs and shocks vs. coilover
- What does Edc suppose to do?
- Which worn out suspension parts can cause steering wheel vibration?
- Rotor removal with wheel studs?
- Educate me...air/bag suspension for dummies.
- Steering "knocking" at low speeds
- From Ohlins to AST Suspension, anyone done yet?
- abs speed sensor
- rear arm bushings = group N ?
- Brake sensors
- BBK pad problem
- Tips on Adjusting Coilover Height (Broadway Static) *Pic*
- EDC Issue? Possible super simple fix
- Bilstein B16
- Camber plates with OEM shocks??
- can the pad wear sensor make a brake squeak?
- BBK vs Stock (on-track performance) - data?
- Bushings
- can i lower my car?
- ECS Brake Rotors x OEM
- Question about replacing EDC module
- M Drive with Non EDC/ZCP
- Strut Assembly Advice Needed: Is this anything to worry about?
- My Ohlins Ttx46/Ttx36 true coil over setup and track thread
- Cons to driving w/o front sway bar??
- Missing belly pan bolt ...chassis weak?
- Turner E9x M3 Aluminum Skid Plate Thoughts?
- Control arm pairs
- If you have used race pads with stock calipers....
- For sale KW V3 non EDC
- Bought new BMW rotors
- EDC or no EDC
- Brakes Under Extended Warranty
- Confirmation: Ohlins RT with Apex Wheels
- Air Struts Recommendation
- Chirping noise after spring install
- MCS vs others (high speed compression adjust on 2way?
- 10% off bmw rotors today at autohausaz
- Performance Caliper Guide Bushing
- Best (read: least dust) Brake Pads For Brembo BBK
- subframe delrin vs solid alum