HI, I seem to have a odd one here... this doesn't seem to be the very common spring locator fault as i have very different symptoms
its a November 2017 model Xdrive X1 20d M Sport Auto just less than 27,000 Miles
Car starts, but Cannot engage any gear forward or reverse or even Neutral, the Gear lever will just go straight back into Park after a second or 2 and will not try to move!
Gearbox Code - GA8G45AW
fault codes Via Autel Diag...
420097 Permanent Solenoid Valve SC4: Shut as Defective
4200C1 Permanent solenoid Valve SC4: faulty Closed or oil pressure switch for SC4: faulty off...
when cleared.. after start up go to select a gear.. pops up drivetrain fault and these codes reappear!
gearbox fluid is all new and levels checked and correctly Done via Diag Tool
under live data with Snap On Diag Tool...
when selecting Drive.. it briefly saying its going into reverse...
when selecting reverse... briefly saying its going into 3rd gear
OBD Fault codes are Permanently Stored and Cannot be cleared...
P0736 Reverse incorrect ratio
P2809 pressure Control Solenoid G Stuck On
P2743 Transmission fluid temperature sensor B circuit high
We sourced and Brand NEW Valve Body unit for the gearbox as thinking that was the Failure (The solenoid faults) Replaced, carried out the Necessary Adaptions..
Exactly the Same faults
not under warranty im afraid
Thankyou in advance for any help
Regards Matt