Quote:
Originally Posted by mrpingu
Did you try to press the video-icon with r on the left, what happens then?
If that doesn't work
Can you post a screenshot of TAL calculation?
Go to Comfort Mode => TAL-Calculating
- Read and Save FA
- Activate FA
- Read and Save SVT Actual as SVT_ist
- Create an SVT Target
Under KIS/SVT Target Calculation Strategy, select Complete Flash
Select I-Step (shipm.) to match your original I-Level as read and shown in VCM I-Step (Shipment)
I-Step (target.) will be unselectable as it is fixed based on current PSdZData I-Level
Do a KIS/SVT Target Calculation and Save as SVT_soll
- Do a TAL Calculation and Save as SVT_tal
Edit:
1) And try to install ISTA and see if you get any errors on the ECU tree.
2) Did you also check with multimeter if you are getting 12V between Ground & camera ECU?
|
Screen Shot of SVT calculation and Tal Calculation i can pvt the file
I checked power pin 4 from fuse to camera and getting power.
Ista shows the attached. i never had TRSVC before coding 3ag. also the PMA started showing orange after i done this project... although all parking sensors wrking and no errors on dash
thanks bud